Conference Proceedings

  • “Applying Micromechanical Models in Deformation Process Simulation”, P.R. Dawson, A. Jagota, K.K. Mathur, in Interdisciplinary Issues in Materials Processing and Manufacturing, S.K. Samanta et al. (eds.), American Society of Mechanical Engineers, p. 469, 1987.
  • “A Vibrational Technique for the Measurement of Stress in Thin Films”, A. Jagota, S. Mazur, R.J. Farris, Materials Research Society Symposium on Stress in Thin Films: Measurement and Theory, 188, 35-40, (1990).
  • “Stress in Metal Foils During Processing and Thermal Cycling”, A. Jagota, M.F. Lemon, Y.H. Hu,  Materials Research Society Symposium Proceedings, 226, 197-202, (1991).
  • “Sintering of Glass Powder Packings with Metal Inclusions”, A. Jagota, E.D. Boyes, R.K. Bordia,  Materials Research Society Symposium Proceedings, 249, 475-480, Symposium on Synthesis and Processing of Ceramics: Scientific Issues, MRS Fall Meeting, 1991, Boston.
  • “Effect of Inclusions on Viscous Sintering”, G.W. Scherer, A. Jagota, Advanced Composite Materials, 99-109, (1991).
  • “Discrete Models for Particle Packings” A. Jagota, MRS Proceedings, Symp. on Computat. Meth. in Mater. Sci., Spring Meeting, 1992 278, 293-298.
  • “Effective Sintering Rates and Viscosities of Two-Dimensional Composite Packings” A. Jagota, in Mechanics of Granular Materials and Powder Systems, M.M. Mehrabadi (editor), ASME MD-vol 37, 39-49 (1992).
  • “Effective Viscosity and Sintering Rate of a Composite Random Packing of Spheres”, A. Jagota, Powders and Grains 93: proceedings of the second international conference on micromechanics of granular media, Birmingham, UK 12-16 July (1993), C. Thornton (editor), A.A. Balkema, Rotterdam (publisher).
  • “Spring-Network and Finite-Element Models for Elasticity and Fracture”, A. Jagota, S.J. Bennison, proceedings of a workshop on Breakdown and non-linearity in soft condensed matter, K.K. Bardhan, B.K. Chakrabarti, A. Hansen (eds), Spring-Verlag Lecture Notes in Physics (1994), conference held at the Saha Institute for Nuclear Physics, Calcutta, India, 1-9 December, 1993, page 186-201 vol. 437. (1994), Springer-Verlag (Berlin, Heidelberg, New York), ISBN 3-540-58652-0.
  • “Viscosities and Sintering Rates of Composite Packings of Spheres”, A. Jagota, proceedings of a workshop on Mechanics and Statistical Physics of Granular Materials, Institute of Mechanics and Materials, University of California (San Diego), June 8-10, 1994.
  • “Computational Models for Brittle Fracture”, A. Jagota, S.J. Bennison, Proceedings of a symposium on Computational Methods in Materials Science, The American Ceramic Society (1995).
  • “Problems in Viscoelastic Neck Growth”, C.R. Argento, S. Mazur, A. Jagota, proceedings of International Conference on Sintering, Penn. State. Sept. 1995, Randall M. German, Gary L. Messing, Robert G. Cornwall (eds.) Marcel Dekker Inc (pubs) New York (1996) pp 21-28.
  • “Structural Performance of Laminated Building Glass”, R.V. Foss, A. Jagota, S.J. Bennison, A. Van Duser, C.A. Smith, proceedings of international conference on glass in buildings, University of Bath 3 April 1999.
  • “Mechanical Deformation and Fracture of Glass/PVB Laminates”, A. Jagota, S.J. Bennison, C.A. Smith, R.V. Foss, A. Van Duser, proceedings of the sixth international conference on architectural and automotive glass Glass Processing Days 1999, pp 370-374, 13-16 June 1999, Tampere (Finland), published by Tamglass Ltd. Oy, Vehmaistenkatu 5, Tampere (Finland).
  • “Cohesive Zone Models and Finite Elements for Simulation of Polymer Interfacial Fracture”, A. Jagota, S.J. Bennison, P. Rahul Kumar, S. Saigal, proceedings of Adhesion ’99, 15-17 September 1999, Churchill College, Cambridge UK.
  • “Energy Partitioning in Adhesion Between Glass and poly(vinyl butyral) (Butacite®)”, S.J. Bennison, A. Jagota, C.A. Smith, S. Muralidhar, S. Saigal, proceedings of Adhesion ’99, 15-17 September 1999, Churchill College, Cambridge UK.
  • “Exploring Multimedia for Exposition of Materials Research”, S. Jagota, K. Krishnaswami, N. Ram, A. Jagota, Proceedings of NSF Design & Manufacturing Annual Conference, Vancouver (Canada) (January 2000).
  • “Structural Performance of Laminated Safety Glass”, S.J. Bennison, P.S. Davies, A. Jagota, A. Van Duser, C.A. Smith & R.V. Foss, proceedings of Glass Tech Asia 2000 (March 1-2, 2000, Singapore).
  • “Crack Blunting in a Soft Elastic Material”, A. Jagota, C-Y. Hui, proceedings of the 24th Annual Meeting of the Adhesion Society, February 25-28, 2001 (Williamsburg, VA, USA), (2001).
  • “Influence of Cohesive Zone Parameters on an Instability during Cleavage of Mica”, J. Hill, S.J. Bennison, P.A. Klein, A. Jagota, S. Saigal, In: Proc. 10th Intl. Conf. Frac.  (2001).
  • “Structural Performance of Laminated Safety Glass Made with “Stiff” Interlayers”, S.J. Bennison, C.A. Smith, A. Van Duser, A. Jagota, proceedings of the seventh international conference on architectural and automotive glass Glass Processing Days 2001, Tampere (Finland), published by Tamglass Ltd. Oy, Vehmaistenkatu 5, Tampere (Finland).
  • “Strength of Laminated Safety Glass”, S.J. Bennison, C.A. Smith, A. Van Duser, A. Jagota, proceedings of the seventh international conference on architectural and automotive glass Glass Processing Days 2001, Tampere (Finland), published by Tamglass Ltd. Oy, Vehmaistenkatu 5, Tampere (Finland).
  • “Structural Performance of Laminated Glass Made with DuPont’s SentryGlasTM Plus Interlayer”, S.J. Bennison, C.A. Smith, A. Van Duser, A. Jagota, International Glass Review (March 2002).
  • “Influence of Adhesion on Stability and Accuracy of Micro-Contact Printing”, C-Y. Hui, A. Jagota, Proceedings of the 25th Annual Meeting of the Adhesion Society (2002).
  • “Selectivity of Polypeptide Binding to Nanoscale Substrates”, S.R. Lustig, A. Jagota, Proceedings of the Materials Research Society Spring meeting (2002).
  • “Stamp Deformation during Microcontact Printing”, Kenneth G. Sharp, Anand Jagota, David F. Kristunas, Proceedings of the Materials Research Society Spring (2002).
  • “Crack Blunting and the Strength of Soft Solids”, C-Y. Hui, A. Jagota, S.J. Bennison, J.D. Londono, Proceedings of Annual Adhesion Society Meeting, (2003).
  • “Mechanical Behavior of Elastomeric Stamps During Microcontact Printing Patterns: Direct Observation of Stamps and Inks”, Gregory S. Blackman, Anand Jagota, Kenneth G. Sharp, Proceedings of the Materials Research Society, 778 Symposium on Mechanical Properties Derived from Nanostructuring Materials, David F. Bahr, Harriet Kung, Neville R. Moody, Kathryn J. Wahl (eds.) (2003).
  • “How Compliance Compensates for Surface Roughness in Fibrillar Adhesion”, C-Y. Hui, N.J. Glassmaker, A. Jagota, Proceedings of Annual Adhesion Society Meeting, (2005).
  • “Adhesive Contact Driven by Electrostatic Forces”, C-Y. Hui, T. Tang, A. Jagota, Proceedings of the Annual Adhesion Society Meeting (2005).
  • “Adhesion and collapse of single-walled carbon nanotubes”, Tian Tang, Anand Jagota, Chung-Yuen Hui, Nicholas J. Glassmaker, Proceedings of the Annual Adhesion Society Meeting (2006).
  • “Mechanics of anti-fouling or self-cleaning in Geckos”, Chung-Yuen Hui, Lulin Shen, Anand Jagota, K. Autumn, Proceedings of the Annual Adhesion Society Meeting (2006).
  • “Contact and Adhesion Mechanics of Biomimetic Fibrillar Interfaces”, N.J. Glassmaker, Anand Jagota, C-Y. Hui, M.K. Chaudhury, Proceedings of the Annual Meeting of the Adhesion Society (2006).
  • “Indentation studies of film-terminated fibrillar surfaces”, W.L. Noderer, S. Vajpayee, N.J. Glassmaker, A. Jagota, C-Y. Hui. Proceedings of the Annual Adhesion Society Meeting (2007).
  • “Adhesion between single-stranded DNA and carbon nanotubes”, S. Manohar, T. Tang, A. Jagota, C-Y. Hui, Proceedings of the Annual Adhesion Society Meeting (2007).
  • “Self-forming terminal elements in fibrillar adhesives”, M. Havener, T. Tang, A. Jagota, Proceedings of the Annual Adhesion Society Meeting (2007).
  • “Biomimetic Design of Fibrillar Interfaces for Adhesion, Tribology, and other Surface Properties,” Anand Jagota, Chung-Yuen Hui, David L. Hallahan, Richard P. Vinci, NSF-CMMI Grantees Conference Proceedings (2008).
  • “Study on enhanced adhesion of synthetic film-terminated fibrillar interfaces”, L. Shen, C-Y. Hui, A. Jagota, N.J. Glassmaker, Proceedings of the Annual Adhesion Society Meeting (2007).
  • “Adhesion Selectivity Using Rippled Surfaces,” Shilpi Vajpayee, Krishnacharya Khare, Shu Yang, Chung-Yuen Hui, and Anand Jagota, Proceedings of the Annual Adhesion Society Meeting (2011).